How to make the laser engraving machine work better

Laser engraving function to improve the efficiency of carving, carved in the surface is smooth, fruity, quickly lower the temperature of the carved of non-metallic materials, reduce the deformation and internal stress carved;Can be widely used in the field of all kinds of non-metal materials with fine carving.Daily use in the process of how to use the laser engraving machine, make it play its maximum effect, the following said use skills:

1. When using the environment temperature should be controlled in the range of 5 to 35 ℃.Special note: if used in the environmental conditions well below freezing point, when switched on, the laser current preheating 5 minutes or more to get to work, keep the laser tube water cycle must be thoroughly after downtime will light water,the laser engraving machine price is reasonable.
2. The laser power, laser cutting machine tool body must have a good grounding protection, ground application is less than 4 Ω special ground.
3. The machine check regularly, reinforced screw and guide rail, air blower, the maintenance and maintenance of the lens
4. Cleaning and maintenance, good ventilation, wipe at any time So that the flexible drive, processing precision, prolong the service life of machine tool.

In the course of using the laser engraving machine, in the cause of the noise is mainly:

1. The axial abnormal noise when walking, produce this kind of phenomenon is mostly the X axis.
   Laser engraving machine for axial motor bearing damage or X axial guideway lack of lubricating oil, too dirty, too close, ball wear, ball drop, etc., must be handled in time.
2. The spindle motor abnormal noise when running.
   The production of this kind of noise, prove the existence of main shaft bearing quality problem or the service life of the mainshaft bearing has to, or lower quality or damage after wear, can consider to change at this time.

The classification of the laser engraving machine and daily use requirements.

Laser engraving machine is used for all kinds of non-metal materials with fine carvings, make was carved in the surface of the smooth, rounded, quickly lower the temperature of the carved of non-metallic materials, reduce the deformation and internal stress of the carved work.Laser engraving machine non-metallic laser engraving machine and metal can be roughly divided into two kinds of laser engraving machine.Non-metallic carving machine and can be divided into: general carving machine and non-metallic marking machine.Metal engraving machine also can be divided into metal marking machine and metal engraving cutting machine,the prospect of laser engraver for sale is very good.

Laser cutting machine for daily use notice:

1. when using the automatic focus, pay attention to the automatic focus measurement must be tightened, or work surface would be to the laser.
2. laser engraving machine at work, open the machine cover is prohibited.
3. processing when open the exhaust smoke, smoke blown equipment.
4. processing and wood, paper, must pay attention to the processing speed in order to avoid a fire.
5. irregular processing when the initial users to red light positioning.
6. processing wood veneers, fluidity material, xiao yu 1 mm to adjust the amplitude of water.
7. cutting processing, to use artifacts from table 2 centimeters of above.
8. reflection lens and focus lens cleaning: two fingers hold the reflective lenses.On the other hand paper to clean the lens of your camera lens.
9. usually carved file, the resolution should be a few taller, carving point, when there is a low resolution should be chosen,the prospect of laser engraving machine for sale is very good.

Categories

Recent Post

Tips for resuming work: Guide to resuming laser work after the holidays

Laser welding machines are widely used in various industries

Why is the laser welding machine bright and dark at the same time?

What materials can the laser welding machine weld?

What factors affect the price of laser welding machines?

Tag Cloud